HARDWARE FEATURES |
Processor |
Qualcomm Atheros 560MHz CPU, MIPS 24Kc |
|
Memory |
64MB DDR2 RAM, 8MB Flash |
|
Interface |
1 10/100Mbps Shielded Ethernet Port (LAN0, Passive PoE in), 1 10/100Mbps Shielded Ethernet Port (LAN1), 1 Grounding Terminal, 1 Reset Button |
|
Power Supply |
Passive Power over Ethernet via LAN0 (+4, 5pins; -7, 8pins), Voltage range: 16-27VDC |
|
Power Consumption |
10.8 Watts Max (Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable.) |
|
Dimensions (W x D x H) |
11×3.1×2.1 inch (276×79×60 mm) |
|
Antenna Type |
Built-in 12dBi 2×2 Dual-polarized Directional Antenna, Beam Width: 60° (H-Plane) / 30° (E-Plane) (Note: For more details, please refer to datasheet) |
|
Protection |
15KV ESD Protection, 6KV Lightning Protection |
|
Enclosure |
Outdoor ASA stabilized plastic material, IPX5 waterproof Certification |
WIRELESS FEATURES |
Wireless Standards |
IEEE 802.11b/g/n (with Pharos MAXtream disabled) |
|
Proprietary Protocol |
TDMA Mode (with Pharos MAXtream enabled) |
|
Wireless Speeds |
Up to 300Mbps (40MHz, Dynamic), Up to 144.4Mbps (20MHz, Dynamic), Up to 72.2Mbps (10MHz, Dynamic), Up to 36.1Mbps (5MHz, Dynamic) |
|
Frequency |
2.4~2.483GHz (Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used.) |
|
Transmission Power |
30dBm/1000mw (Adjustable power by 1dBm) (Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used.) |
SOFTWARE FEATURES |
Wireless Configurations |
Pharos MAXtream TDMA Technology, 802.11b/g/n Modes, Selectable Channel Width: 5/10/20/40MHz, Automatic Channel Selection, Transmission Power Control, Dynamic Frequency Selection (DFS), WDS Enable/Disable, Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption, SSID Broadcast Enable/Disable, Multi-SSID with VLAN Tagging (AP mode only), Distance/ACK Timeout Setting, Wireless MAC Address Filter, Wireless Advanced: > Beacon Interval/RTS Threshold/Fragmentation Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia |
|
Management |
Discovery and Remote Management via Pharos Control application, HTTP/HTTPS Web-based management, System Log, SNMP Agent (v2c), Ping Watch Dog, Dynamic DDNS, SSH Server |
|
System Tools |
Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory, Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP, Spectrum Analyzer, Speed Test, Ping, Traceroute |
|
System-level Optimizations |
Optimized IGMP Snooping/Proxy for multicast applications, Hardware watch dog |
POE ADAPTER FEATURES |
Dimensions (W x D x H) |
85.8×43.9×31.9 mm |
|
Interfaces |
1 AC Jack with Earth Ground, 1 10/100/1000Mbps Shielded Ethernet Port (Power + Data), 1 10/100/1000Mbps Shielded Ethernet Port (Data) |
|
Button |
Remote Reset Button |
|
Power Status LEDs |
Green |
|
Input |
100-240VAC, 50/60Hz |
|
Output |
24VDC, 0.5A Max (+4, 5pins; -7, 8pins. Support up to 60m Power over Ethernet) |
|
Efficiency |
>80% |
|
Certifications |
CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark |
OTHERS |
Certification |
CE, FCC, RoHS, IPX5 |
|
Package Contents |
Outdoor Wireless CPE, 24V 0.5A Passive PoE Adapter, Pole Mounting Straps, AC Power Cord, Installation Guide |
|
System Requirements |
Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux. (Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended.) |
|
Environment |
Operating Temperature: -40℃~70℃ (-40℉~158℉), Storage Temperature: -40℃~70℃ (-40℉~158℉), Operating Humidity: 10%~90% non-condensing, Storage Humidity: 5%~95% non-condensing |
Reviews
There are no reviews yet.